RETZ品牌 进口弹性柱销联轴器 弹性套柱销连轴器

品牌：RETZ/我们一直致力于机械设备和测控领域的持续创新，始于2005……进口弹性柱销联轴器齿面润滑状况直接影响其使用寿命和安全可靠性。因此，需要至少每3个月检查并润滑润滑一次。当设备长期停用时，应更换所有润滑脂，以防止润滑脂长期失效。在正常工作条件下，弹性柱销联轴器的润滑脂需要至少每半年更换一次。每3个月至少检查一次定位磨耗指针与卷筒联轴器定位磨耗槽的相对位置及连接螺栓的状况。弹性柱销联轴器安装前，应检查联轴器配合面，清除防锈油脂、毛刺和油污。鼓形联轴器通常为过盈配合，应拆卸并加热。拆卸后，所有零件应集中放置，以免丢失和损坏。

进口弹性柱销联轴器产品用途 Product use

1.广泛用于载荷不大，由电动机驱动的各种中、小功率传动轴系中，如减速机、起重机、压缩机、输送机、纺织机、卷扬机、球磨机 Widely used invarious medium and small power transmission shafting systems driven by electricmotors with small loads, such as speed reducers, cranes, compressors,conveyors, textile machines, hoists, and ball mills

2.如若安装调整后能保持两轴相对位移量在规定的范围内，则联轴器会有满意的使用性能和较长的工作寿命 If the relativedis cement of the two shafts can be maintained within the specified rangeafter installation and adjustment, the coupling will have satisfactory serviceperformance and long working life

3.安装维修方便，适应正反转多变，起动频繁的场合 Convenient maintenance, suitablefor occasions with variable forward and reverse rotation and frequent starting

4.工作温度-20℃-+70℃  Operating temperature - 20 ℃ -+70 ℃

进口弹性柱销联轴器结构特点 Structural features

1.安装底座刚性好、对中精度较高、冲击载荷不大、对减振要求不高的中小功率水泵等传动 Transmission ofmedium and small power water pumps with good rigidity of the mounting base,high alignment accuracy, low impact load, and low vibration reductionrequirements

2.有一定的补偿两轴之间的相对位移量和减震性能 There is a certain compensationfor the relative dis cement between the two shafts and the dampingperformance

3.结构简单，安装方便，更换弹性套容易，尺寸小，重量轻 Simple structure, convenientinstallation, easy re cement of elastic sleeve, small size, light weight