|
||||
热电偶专用高温电缆High Temperature Cable Special For Thermocouple本产品为热电偶专用的高温连接线。产品具有优良的耐腐蚀性能,几乎不溶于任何 ,可耐油、耐酸碱等;具有优良的电绝缘性能,不吸潮,绝缘电阻大;具有阻燃性能。The cable is a special high temperature connecting wire of thermocouple. It has many good features such as excellent corrosion resistance, almost insoluble in any organic solvents, oil resistance, acid resistance, better electrical insulating properties, moisture resistance, big insulated resistance, flame resistance and so on. 一、产品执行标准 企标 Executive standard: enterprise standard二、型号ZR-BC-G-VVRP阻燃型号屏蔽电缆高清照片[股份@有限公司]欢迎您什么是变频器?变频器是通过应用电力电子技术,改变电机工作电源频率,以控制电机不同转速的电力控制设备。变频器主要有整流电路、缓冲电路、滤波电路、逆变电路等组成。附整流电路:主要由整流桥组成;将交流电(市电)经过全桥整流后成直流电。对于三相380V的交流电, 37V;而单相220V的交流电,经整流后,直流电压理论值为220X1.414≈310V。缓冲电路:在上电瞬间的冲击电流。 Type型号type 名称descriptionAKFFPXR200 K型热电偶专用高温屏蔽电缆High temperature shielding cable special for K type thermocoupleANFFPXR200 N型热电偶专用高温屏蔽电缆High temperature shielding cable special for N type thermocoupleAEFFPXR200 E型热电偶专用高温屏蔽电缆High temperature shielding cable special for E type thermocoupleAJFFPXR200 J型热电偶专用高温屏蔽电缆High temperature shielding cable special for J type thermocoupleATFFPXR200 T型热电偶专用高温屏蔽电缆High temperature shielding cable special for T type thermocouple三、使用特性 operating characteristics 1、工作温度:电缆导体长期工作温度为200℃。 Long term operating temperature of cable conductor is 200℃.ZR-BC-G-VVRP阻燃型号屏蔽电缆高清照片[股份@有限公司]欢迎您弱电建筑智能化人类在发展,社会在进步,将“弱电”定义为建筑智能化的概念已不能适应现状,与“弱电”工程特点和工作内容相符的新系统越来越多,工程范围也越来越广,有些项目无法界定行业管理。“建筑智能化”已经不能概括“弱电”范畴。我想,我们是不是可以给弱电定义一个这样的范畴:弱电:“以硬件系统为主的民用智能系统项目”以及“民用智能系统项目中硬件系统子项”的总称,包括产品/系统及解决方案、项目确立、规划设计、实施落地及 终使用维护全过程。 2、弯曲半径:电缆弯曲半径不低于电缆外径的10倍。Bending radius of cable shall be no less than 10 times that of cable outer diameter. 3 sp; Flame resistant characteristic shall meet the requirements spe standard.四、性能参数表Performance parameter项目Item 单位Unit 技术指标Technical Indices绝缘电阻Insulated resistance MΩ 25电压试验Test voltage V 500V 1min 不击穿Finished cable shall endure 500v voltage test for 1 min without puncture.ZR-BC-G-VVRP阻燃型号屏蔽电缆高清照片[股份@有限公司]欢迎您值班人员应熟知系统和运行方式。在发生人身触电、火灾及可能造成重大设备损坏事故时,值班人员可自行决定停电,但事后须尽快报告领导。对所有工具、备件、仪器、仪表及消防器材要妥善保管,不得损坏。交接班制度。值班人员必须按照值班轮流表和时间进行值班,未经领导允许不准随意替换。值班人员必须在接班前15分钟到达交接地点。经共同检查认为无误后,双方在交接班记录薄上签字。应交而未交接所发生的一切事故或问题由交班者负责。 |
|